LT1367 |
RFQ for LT1367 Required Field |
 |
| Technical/Catalog Information | LT1367CS |
| Vendor | Linear Technology |
| Category | Integrated Circuits (ICs) |
| Packaging | Tube |
| Amplifier Type | General Purpose |
| Number of Circuits | 4 - Quad |
| Package / Case | 14-SOIC (3.9mm Width), 14-SOL |
| Slew Rate | 0.13 V/s |
| Gain Bandwidth Product | 400kHz |
| Current - Supply | 370A |
| Current - Output / Channel | 75mA |
| Voltage - Supply, Single/Dual (±) | 1.8 V ~ 30 V, ±0.9 V ~ 15 V |
| Output Type | Rail-to-Rail |
| -3db Bandwidth | - |
| Current - Input Bias | 10nA |
| Operating Temperature | 0°C ~ 70°C |
| Voltage - Input Offset | 200V |
| Drawing Number | 161; 05-08-1610; S; 8 |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | LT1367CS LT1367CS |
| Product | Manufacturers | Pack | D/C |
| LT1367 | - | N/A | N/A |
The LT®1366/LT1367/LT1368/LT1369 are dual and quad bipolar op amps which combine rail-to-rail input and output operation with precision specifications. These opamps maintain their characteristics over a supply range of 1.8V to 36V. Operation is specified for 3V, 5V and ± 15V
upplies. Input offset voltage is typically 150µV, with an open-loop gain A VOL of 1 million while driving a 10k load. Common mode rejection is typically 90dB over the full rail-to-rail input range, and supply rejection is 110dB.
The LT1366/LT1367 have conventional compensation which assures stability for capacitive loads of 1000pF or less. The LT1368/LT1369 have compensation that requires a 0.1µF output capacitor, which improves the amplifier's supply rejection and reduces output impedance at high frequencies. The output capacitor's filtering action reduces high frequency noise, which is beneficial when driving A/D converters.
The LT1366/LT1368 are available in plastic 8-pin PDIP and 8-lead SO packages with the standard dual op amp pinout. The LT1367/LT1369 feature the standard quad pinout, which is available in a plastic 14-lead SO package. These devices can be used as plug-in replacements for many standard op amps to improve input/output range and precision.
Typical Application |
Features |
| Rail-to-Rail Buffer AmplifiersLow Voltage Signal ProcessingSupply Current Sensing at Either RailDriving A/D Converters | Input Common Mode Range Includes Both Rails Output Swings Rail-to-Rail Low Input Offset Voltage: 150µV High Common Mode Rejection Ratio: 90dB High AVOL: >1V/µV Driving 10kΩLoad Low Input Bias Current: 10nA Wide Supply Range: 1.8V to ±15V Low Supply Current: 375µA per Amplifier High Output Drive: 30mA 400kHz Gain-Bandwidth Product Slew Rate: 0.13V/µs Stable for Capacitive Loads up to 1000pF |
